Commercial Dishwasher Draining Hose Clogged: Quick Fixes You Need To Know

Commercial Dishwasher Draining Hose Clogged: Quick Fixes You Need To Know

A clogged Commercial dishwasher draining hose can cause major disruptions in your kitchen, leading to slow drainage or standing water. If you're facing issues with your commercial dishwasher, it's important to address the problem quickly to avoid further complications. In this article, we’ll guide you through effective, quick fixes to clear the clog and restore your dishwasher’s efficiency. Keep reading to learn simple steps that will have your dishwasher draining hose working like new in no time

Quick Fixes for a Clogged Commercial Dishwasher Draining Hose

Having a problem with a clogged commercial dishwasher draining hose? In this article, you can find tips on how to address issues and maintain your dishwasher so that you can continue to use it for its intended purpose with little difficulty. Scroll down for simple solutions.

1. Inspect and Clear Debris

One of the main reasons why clogs are likely to occur is when the hose is filled with food particles, grease, and soap scum. This gradually accumulates and hampers the flow of water, which causes drainage problems.

How To Fix:

• Turn off the hose from the dishwasher and the drain. Check the hose for any visible dirt and clean it with a long brush or warm water. For tough grease, use mild detergent to emulsify the grease before rinsing with water.

2. Use Hot Water and Vinegar for Stubborn Clogs

Soap scum and grease are some of the most stubborn stains that can be hard to clean using normal washing. To address this, a logical remedy is to use hot water mixed with vinegar, which can help dissolve the blockage.

How To Fix:

• Rinse the hose with a solution of hot water and vinegar and let it soak for 10-15 minutes. This will help to emulsify the grease and soap so that it can be washed easily. To remove the dissolved particles, rinse the hose with fresh water. 

3. Check for Kinks and Twists

Coils or curves in the hose can also impede water flow and result in drainage problems. A misaligned hose can hinder the flow of wastewater even if the hose is clean and free from obstruction.

How To Fix:

• Verify that the hose is not twisted or bent in any manner. Unkink any kinks to ensure that water flows freely and let gravity help in the draining process.

4. Clear Foreign Objects from the Hose

The hose can also be blocked by foreign objects like pieces of a broken dishware, utensils or any other debris that may find their way into the hose. If not checked, these objects may lead to total drain blockage.

How To Fix:

• Take off the hose and check for any debris that might be obstructing the water flow. You can try using a plumber’s snake or try to push the object through gently. After this, reconnect the hose and check the drainage.

5. Reinstall the Hose Correctly

Drainage can be greatly affected by an improperly installed hose. If the hose is not positioned at the right angle, water may not drain out as it should, and this may lead to water pooling inside the dishwasher.

How To Fix:

•  Make sure the hose is properly installed with the right gradient to help in the drainage process. Do not use sharp bends that may hinder the flow of water in the pipe. Ensure that the hose is placed in the right position as recommended by the manufacturer.

Here are some simple solutions that you can use to address any problems with your dishwasher draining hose and have your commercial dishwasher up and running again. Maintenance and early intervention will help to avoid future blockages and enhance the performance of the system. If you come across any other issues in the future, do not forget to check this guide for more professional advice on how to maintain your dishwasher and fix any issues that may arise in the future.

Written by Allen Rode for PartsFeUK, your trusted source for a variety of high-quality commercial restaurant equipment, including Dishwasher Draining Hose, and pilot light.